Railing Accessories
Essential stainless steel railing finishing accessories, cover plates, EPDM rubber isolation gaskets, and end sphere caps for global railing fabricators.
View all architectural stainless steel railing components in this Railing Accessories family. All fittings are mill-tested to ASTM standards and chemically passivated for superior corrosion resistance in commercial, coastal, and high-humidity building environments.
Grade 304 is the cost-effective standard for indoor staircases and climate-controlled commercial spaces, providing durable structural support and reliable rust resistance for interior Railing Accessories installations.
Grade 316 contains 2.0-3.0% Molybdenum, making it mandatory for outdoor Railing Accessories installed on exterior decks, beachfront balconies, swimming pool surrounds, and high-salinity coastal environments.
Duplex 2205 provides double the mechanical yield strength of Grade 316 with ultimate resistance to chloride stress corrosion cracking, ideal for extreme marine and high-load Railing Accessories architectural applications.
Our professional-grade Railing Accessories comply with international building code requirements for public safety railings. Suitable for new construction, renovation, and retrofitting projects, these components deliver stable structural performance, corrosion resistance, and consistent installation tolerance for high-end residential balconies, commercial terraces, hotel swimming pool fences, and coastal marine architecture.

Round Glass Standoff Flat Base Spacer
Node: Flat Stringer/Post Surface Mount | Pin-Clamps Frameless Glass Hole | Rubber Gasket Cushion IsolationSKU: ES-3014Alloys: 201, 304, 316Request Fast Quote
Round Threaded Glass Standoff Spacer
Node: Stringer / Fascia Bolt Mount | Point-Fixes Glass Hole | Heavy Threaded M12 Spacer StudSKU: ES-3015Alloys: 201, 304, 316Request Fast Quote
Round Base Cover Tall Spacer Ring
Node: Uneven Concrete Floor Fit | Elevates Post Base Clearance | 15mm Tall Ring Spacer CollarSKU: ES-4006Round: Φ38.1, 42.4, 48.3, 50.8mmAlloys: 201, 304, 316Request Fast Quote
Round Base Cover Ring Spacer Plate
Node: Post Base Flange Elevation | Bridges Height Gaps | Smooth Oval Ring CollarSKU: ES-4002Round: Φ38.1, 50.8mmAlloys: 201, 304, 316Request Fast Quote
Round Base Cover Flat Spacer Ring
Node: Under Base Flange Pad | Insulates Thermal Expansion | Flat Circular Ring SpacerSKU: ES-4005Round: Φ42.4, 50.8mmAlloys: 201, 304, 316Request Fast Quote
Pre-Engineered Systems Utilizing These Components
-
Flat-back glass standoffs and heavy-threaded stud standoffs point-fix structural glass panels directly to the sides of stair stringers, concrete floor slabs, and steel posts. Each standoff includes dual high-durometer EPDM rubber isolation washers and a plastic bushing to cushion the glass hole and eliminate direct metal-to-glass contact.
-
Base spacer collars elevate bottom post flanges slightly above finished floor level, creating a drainage clearance that prevents water pooling around anchor bolts on outdoor concrete slabs and accommodating leveling shims on uneven surfaces.
-
When stainless steel base plates or brackets are mounted onto dissimilar metal substrates, pre-cut EPDM isolation gaskets provide a non-conductive dielectric barrier that stops electrochemical galvanic corrosion while sealing anchor bolt holes against water ingress.
-
For standard M12 threaded standoff studs, glass panels must be pre-drilled with a nominal hole diameter of 16mm to 18mm prior to thermal tempering to provide clearance for the protective isolation sleeve while allowing minor field adjustment.
-
Yes. All stainless steel spacers, standoff caps, and cover rings can be surface-treated with physical vapor deposition (PVD) coating, offering uniform architectural finishes including Matte Black, Brushed Brass, Rose Gold, and Gunmetal Gray.








