Welded Tube Railing System
Monolithic fully-welded stainless steel balustrade panels. Engineered for heavy municipal, transit, and stadium infrastructure.
System Demonstration Video
System Engineering Overview
The SANON Welded Tube Railing System delivers monolithic structural strength. It is built for heavy municipal projects, transit stations, and sports arenas.
Factory-welded panel modules resist extreme crowd pressure and vandalism. We manufacture full-frame panels using ASTM A554 architectural stainless steel tubing with 360-degree hand-polished weld nodes.
Key Structural Features
- Maximum Rigidity: Full-penetration TIG welding eliminates mechanical play.
- High Load Rating: Certified for extreme line loads up to 3.0 kN/m.
- Rapid Panel Drops: Pre-welded sections drop directly over anchor bolts.
View raw material mill certificates at our Certificates section.
Fully-Welded Stainless Steel Round Guardrail
Industrial-grade round pipe balustrade assemblies manufactured via integrated in-house tube welding and 360-degree surface polishing.
- Maximum monolithic structural strength and rigidity
- Seamless hand-ground and polished joint transitions
- Heavy commercial & municipal load rating
Highest vandal-resistance and structural integrity for high-traffic public transit and stadium applications.
Heavy Structural Welded Square Balustrade
Full-penetration welded square tube balustrade frames produced from ASTM A554 architectural stainless steel tubing.
- High torsional stiffness under heavy crowd push loads
- Monolithic frame modules for rapid crane or site placement
- Custom powder coating & PVD finish options
Ideal for large-scale commercial developments requiring pre-fabricated full-panel balustrade drops.
6-Step Mechanical Installation Brief
- Position pre-fabricated welded panel frames over anchor points.
- Bolt base plates to embedded steel plates or core-drill post tails.
- Perform field mechanical splice jointing between panel sections.
- Passivate and touch up weld joints with brush-polishing tools.
Explore Alternative Railing Solutions
Solid Rod & Bar Railing System
Rigid Φ12mm–19mm solid stainless steel horizontal infill bars. Delivers 2.0 kN/m impact resistance with zero long-term sag.
Point-Fixed Glass Standoff System
Solid AISI 316 standoff pins for fascia slab-edge mounting. Preserves 100% usable floor space with high lateral wind resistance.
Frameless Glass Railing System
Heavy-duty AISI 316 and Duplex 2205 spigot systems. Engineered for 10–21.52mm laminated glass with 100% unobstructed views.
System-Specific Technical & Procurement FAQ
Expert engineering guidance, compliance details, and B2B procurement insights tailored specifically for this railing architecture.
When is a welded system preferred over a modular system?
Welded systems are required for heavy public transit hubs, stadiums, and high-security infrastructure demanding maximum vandal resistance.
Does SANON supply pre-fabricated welded panels ready to bolt?
Yes. We manufacture custom pre-welded panel sections with factory-polished joints ready for rapid crane or bolt placement on-site.
What welding process is used in your factory?
We use automated and manual TIG (Argon Arc) welding with matching 304/316 filler wire to ensure high joint strength without porosity.
How do you clean heat tint and weld discoloration?
All welded nodes undergo chemical passivation followed by 360-degree mechanical re-polishing to restore the protective passive layer.
Can this system withstand 3.0 kN/m line load requirements?
Yes. Heavy-wall tube profiles and solid welded nodes easily exceed 3.0 kN/m public safety building code requirements.
What is the maximum pre-welded panel length for shipping?
We fabricate panels up to 2000mm in length to optimize space inside standard 40ft high-cube ocean containers.
How are pre-welded panels packaged for export?
Panels are wrapped in protective PE film, cushioned with foam dividers, and secured inside steel-reinforced wooden crates.