Stainless Steel Handrail System
ADA-compliant continuous wall-mounted and post-top graspable handrails for egress stairways and commercial corridors.
System Demonstration Video
System Engineering Overview
The SANON Stainless Steel Handrail System provides continuous, ergonomic grip support. It is fully compliant with ADA accessibility standards for stairways, ramps, and corridors.
We manufacture smooth round (Φ38.1mm/42.4mm/50.8mm) and square handrail profiles. Heavy flange wall brackets and flush sleeve joiners ensure seamless, endless runs.
Key System Advantages
- ADA Compliance: Ergonomic circular cross-section ensures safe, continuous gripping.
- Heavy Wall Brackets: Cast flanges provide high pull-out load resistance.
- Smooth Return Ends: Return-to-wall safety elbows prevent snagging hazards.
Browse our wall brackets at Handrail Brackets.
Wall-Mounted Ergonomic Handrail Package
Continuous wall-mounted stainless steel handrails with heavy flange brackets, internal joiners, and safety end terminations.
- Ergonomic Φ38.1mm / 42.4mm / 50.8mm graspable round profiles
- ADA-compliant wall clearance mounting brackets
- Domed or spherical end ball caps
Delivers continuous graspable support along egress stairways and commercial corridors.
Post-Top Mounted Modular Handrail Package
Handrail assemblies mounted onto vertical baluster posts via fixed or sloped-rake saddle brackets.
- Variable angle rake adjustment to match custom stair pitch
- Flat-bottom and round tube saddle interface options
- Flush sleeve joiner integration for endless runs
Integrates seamlessly with post-supported glass, cable, or tube balustrades as an auxiliary top grab rail.
6-Step Mechanical Installation Brief
- Locate wall studs or solid masonry backing points.
- Mount heavy-duty bracket flanges using counter-sunk anchors.
- Connect handrail tube runs using internal expansion joiners.
- Secure the handrail tube to bracket saddle cradles.
- Press-fit code-mandated return-to-wall safety end elbows.
Explore Alternative Railing Solutions
Solid Rod & Bar Railing System
Rigid Φ12mm–19mm solid stainless steel horizontal infill bars. Delivers 2.0 kN/m impact resistance with zero long-term sag.
Point-Fixed Glass Standoff System
Solid AISI 316 standoff pins for fascia slab-edge mounting. Preserves 100% usable floor space with high lateral wind resistance.
Frameless Glass Railing System
Heavy-duty AISI 316 and Duplex 2205 spigot systems. Engineered for 10–21.52mm laminated glass with 100% unobstructed views.
System-Specific Technical & Procurement FAQ
Expert engineering guidance, compliance details, and B2B procurement insights tailored specifically for this railing architecture.
What makes a handrail ADA compliant?
ADA handrails must feature a continuous graspable profile (outer diameter 32mm–50mm) with 38mm clear space from the wall and return-to-wall closed ends.
What is the recommended bracket spacing for wall handrails?
We recommend spacing wall brackets between 1000mm and 1200mm center-to-center to ensure rigid support under heavy downward loads.
Can this handrail mount on glass or cable balustrades?
Yes. We supply post-top saddle brackets and slotted tube profiles that fit directly over glass edges and baluster posts.
How do you create smooth continuous handrail runs?
We use internal mechanical sleeve joiners that slide inside the tube ends, creating invisible, seamless joint transitions.
What end terminations are available?
We provide return-to-wall 90-degree elbows, flat end caps, and domed ball caps in matching satin and mirror finishes.
How do you clean and maintain stainless handrails?
Regular cleaning with mild soap and warm water removes oils and keeps the passive chromium oxide layer pristine.
What is the standard export package for handrails?
Tubes are individually sleeved in PE film and packed in reinforced cardboard tubes or wooden crates for container export.